Filter
Top Products
Océ Power Logic®: Remote Logic 131
Installation procedure for MS Windows®
systems
Before you install Océ Remote Logic
®
, you must take note of the following
minimum system requirements for the remote system. The system must be a
Pentium
®
233with32MbRAMrunningWindows
®
95, 98, NT
®
(service pack
3) Windows
®
2000 or Windows
®
XP, Contact your local Océ organisation for
more possible systems.
Océ Remote Logic
®
(Queue Manager, System Control Panel and Settings
Editor) are on the Océ TDS400 CD-ROM and on the Océ Power Logic®
Controller CD-ROM provided with the system. The installation procedure for
Remote Logic® is quite simple and self-explanatory. When you select the
‘Install remote applications’ option on the CD-ROM, a Wizard starts to guide
you through the installation process. When the installation process is complete
you do not have to restart your system.
Note: Océ Remote Logic
®
only works when TCP/IP is enabled on your system.
Refer to your system administrator for assistance with the installation
procedure for TCP/IP.
▼ Install Océ Remote Logic
®
1 Insert the Océ Remote Logic
®
CD-ROM or the Océ Power Logic® Controller
CD-ROM into the CD-ROM drive of your PC.
2 Select the ‘Install remote applications’ option.
The installation Wizard starts, and asks to select a setup language.
[53] Choosing a setup language