Filter
Top Products
216 Océ TDS400 User Manual
Automatic format selection
The Océ TDS400 controller switches to the next larger format. For example
you set the 8,5 inch range on the printer. The job you print is an A1 format. The
printer will automatically select the 30 inch format. The next table shows
which format the Océ TDS400 controller chooses if you print a specific format
on a chosen range
.
Reinforcement strips
Information about the different reinforcement strips is available from your Océ
representative.
Automatic format selection
Paper series
DIN DIN carto 21.59 cm Mixed 8,5 and 9,5 inch
DIN range
A3 XX
A2 XX
A1 XX
A0 XX
8,5 inch range
11 inch / B XX
17 inch / C XX
22 inch / D XX
34 inch / E XX
22.86 cm range
12 inch / B+ X
18 inch / C+ X
24 inch / D+ XX
36 inch / E+ XX X X
Other formats
76.20 cm XX
B1 carto X
B1 (DIN) X
B2 carto X
B2 (DIN) X
[133]