Filter
Top Products
Using the Océ TDS400 to Print 29
Menu structure
On the Océ TDS400 printer operator panel, you can do a number of actions.
These actions include:
■ Media settings (material and size).
■ Print info (configuration report, menu card and demo print).
■ Configuration (connectivity issues).
■ System (clear set memory and diagnostic mode).
Media type and size on the printer
One of the features of the Océ TDS400 printer is the automatic media change
function. This function allows the printer to take another roll of the same
format and copy material when the roll becomes empty when you print. You
must configure this setting in the Océ Settings Editor (see ‘Océ Power Logic®:
The Settings Editor’ on page 99).
If you activate this function the machine automatically switches to the other
roll, if the used one becomes empty. The switch only occurs if the kind of
media and the width of the material is the same for both rolls.
Note: The Océ TDS400 Printer can not identify the copy material type and
format. Fill the media and indicate the type and the size as described in
Chapter , ‘Media’ on page 152.
See ‘List of available material types and sizes’ on page 214 for a summary of
all materials for the use with the Océ TDS400 Printer.
If you insert a new roll with another material or with a different width, you
have to program the new roll specifications. Refer to ‘List of available material
types and sizes’ on page 214.
Note: The machines switches automatically to the other roll if the used roll
becomes empty, if you activate this function in the Océ Settings Editor.