Filter
Top Products
44 Océ TDS400 User Manual
Error messages
Error messages
Error messages Explanation
Copy too late
Remove paper
Press <on-line>
The copy is too late at the paperpath output sensor
Remove the print material.
Speed failure
Remove paper
Press <on-line>
A paper jam occurred.
Remove the paper jam and press <on-line>
Knife 1 error
Remove paper
Press <on-line>
An error occurred during the cut of the roll.
Check the paper in the roll unit and remove if necessary.
Press <on-line>.
Knife 2 error
Remove paper
Press <on-line>
An error occurred during the cut of the roll.
Check the paper in the roll unit and remove if necessary.
Press <on-line>.
Roll retract err
Press <on-line>
Print material error when the roll unit takes back the material.
Roll init error
Open roll unit
Press <on-line>
A sensor of the roll unit is activated when power is applied to the
printer.
Open the roll unit.
Guide the paper to the marker (see ‘Feed the material’ on
page 155.
Press <on-line>
Input too late
Open roll unit
Press <on-line>
The input sheet is too late.
Open the roll unit
If necessary, withdraw roll and rewind
Press <on-line>
Deposit error
Press <on-line>
An error in the compact output stacker occurred.
The compact output stacker stops.
The print process continues.
Press <on-line>.
Illegal language on
controller
using UK English
Press <on-line>
The controller has an illegal language.
The controller uses the English language instead of the selected
language.
Call service.
Press <on-line>
Close roll unit
Rewind paper
Press <on-line>
While you printed, the roll unit opened.
Rewind the paper.
Close the roll unit.
Press <on-line>