Filter
Top Products
68 Océ TDS400 User Manual
Stamping
Stamping is an Océ TDS400 option which allows you to print a predefined text
on all your copies. Enable stamping with a password in the Océ Setting Editor.
The key operator can predefine a maximum of 10 stamps in the Océ Settings
Editor (see chapter 5, ‘Océ Power Logic®: The Settings Editor’ on page 99).
You can select one stamp per original and you can select another colour, font
size, drawing method, legend edge or position. A stamp can consist of the
following parts:
■ predefined text
■ date
■ time
▼ How to select a stamp
1
Press the Extra key.
2 Select ‘Paper copy’ with the or key.
3 Press the key to enter the ‘Paper copy’ menu.
4 Select ‘Stamp’ with the or key.
5 Press the key to enter the ‘Stamp’ menu.
6 Select ‘Enable’ with the or key.
7 Press the key to enter the ‘Stamp’ menu.
8 Select ‘on’ with the or key.
9 Press the Confirm key.
10 Press the key to leave the current menu.
11 Select ‘Select’ with the or key.
12 Press the key to enter the ‘Select’ menu.
13 Select a stamp with the or key.
14 Press the Confirm key.
Note: The following procedures are optional.
▼ How to change the stamp color
1
Press the Extra key.
2 Select ‘Paper copy’ with the or key.
3 Press the key to enter the ‘Paper copy’ menu.
4 Select ‘Stamp’ with the or key.
5 Press the key to enter the ‘Stamp’ menu.
6 Select ‘Format’ with the or key.
7 Pressthe keytoenterthe‘Format’menu.