Filter
Top Products
Intel NetStructure
®
MPCBL0001 High Performance Single Board Computer 123
Technical Product Specification
BIOS Setup
The menu represented in the following table is used to configure Boot Settings.
8.4.2 Boot Device Priority Submenu
To access this submenu, select Boot on the menu bar, then Boot Device Priority.
The menu represented in the following table is used to configure boot device priority.
Table 77. Boot Settings Configuration Submenu
Feature Options Description
Quick Boot
Disabled
Enabled
Disable/Enable the BIOS to skip certain tests while booting, to
decrease the time needed to boot the system.
Quiet Boot
Disabled
Enabled
Display normal POST messaged/OEM logo.
AddOn ROM Display
Mode
Force BIOS
Keep Current
Set display mode for Option ROM
Bootup Num-Lock
Off
On
Set power-on state for num-lock.
Typematic Rate
Slow
Fast
Select keyboard Typematic Rate
System Keyboard
Absent
Present
Enable/Disable all keyboards attached to the system.
Boot To OS/2
No
Yes
OS/2 Compatibility mode.
Wait For ‘F1’ If Error
Disabled
Enabled
Disable/enable waiting for F1 key to be pressed if error occurs.
Hit ‘DEL’ Message
Display
Disabled
Enabled
Display “Press DEL to run Setup” in POST.
Soft Reset
Disabled
Enabled
Enable/Disable Soft Reset feature.
Interrupt 19 Capture
Disabled
Enabled
Disable/enable the ability for option ROMs to trap interrupt 19.
NOTE: Bold text indicates default setting.
Main Advanced Boot Security Exit
Boot Settings Configuration
Boot Device Priority
Hard Disk Drives
OS Load Timeout Timer