Filter
Top Products
130 Intel NetStructure
®
MPCBL0001 High Performance Single Board Computer
Technical Product Specification
Error Messages
3B Test for total memory installed in the system. Also, check for DEL or ESC keys to limit
memory test. Display total memory in the system.
3C Mid POST initialization of chipset registers.
40 Detect different devices (Parallel ports, serial ports, and coprocessor in CPU, etc.)
successfully installed in the system and update the BDA, EBDA, etc.
50 Programming the memory hole or any kind of implementation that needs an adjustment in
system RAM size if needed.
52 Updates CMOS memory size from memory found in memory test. Allocates memory for
Extended BIOS Data Area from base memory.
60 Initializes NUM-LOCK status and programs the KBD typematic rate.
75 Initialize Int-13 and prepare for IPL detection.
78 Initializes IPL devices controlled by BIOS and option ROMs.
7A Initializes remaining option ROMs.
7C Generate and write contents of ESCD in NVRam.
84 Log errors encountered during POST.
85 Display errors to the user and gets the user response for error.
87 Execute BIOS setup if needed.
8C Late POST initialization of chipset registers.
8D Build ACPI tables (if ACPI is supported).
8E Program the peripheral parameters. Enable/Disable NMI as selected.
90 Late POST initialization of system management interrupt.
A0 Check boot password if installed.
A1 Clean-up work needed before booting to OS.
A2 Takes care of runtime image preparation for different BIOS modules. Fill the free area in
F000h segment with 0FFh. Initializes the Microsoft IRQ Routing Table. Prepares the runtime
language module. Disables the system configuration display if needed.
A4 Initialize runtime language module.
A7 Displays the system configuration screen if enabled. Initialize the CPUs before boot, which
includes the programming of the MTRRs.
A8 Prepares CPU for OS boot, including final MTRR values.
A9 Waits for user input at config display if needed.
AA Uninstalls POST INT1Ch vector and INT09h vector. Deinitializes the ADM module.
AB Prepares BBS for Int 19 boot.
AC End of POST initialization of chipset registers.
B1 Saves system context for ACPI.
00 Passes control to OS Loader (typically INT19h).
Table 85. POST Code Checkpoints (Sheet 2 of 2)
Checkpoint Description