Filter
Top Products
80 Intel NetStructure
®
MPCBL0001 High Performance Single Board Computer
Technical Product Specification
Connectors
4.2.3 Fibre Channel Small Form-Factor Pluggable (SFP)
Receptacle (J34 and J35)
AMP part number: 1367073-1
The MPCBL0001 SBC has two SFP receptacles that support either the copper or fiber module
interface. Fibre Channel connector J34 and J35 are available at the front panel. See Figure 13,
“MPCBL0001 SBC Connector Locations” on page 70 for its position on the board. See Table 44,
“Fibre Channel SFP Pin Assignments” on page 81 for pinout information.
4.2.4 Fibre Channel SFP Optical Transceiver Module
Refer to the Intel NetStructure
®
MPCBL0001 Compatibility Report for a list of SFP optical
transceivers that have been validated. The report can be downloaded from
http://www.intel.com/design/network/products/cbp/atca/mpcbl0001.htm
Table 43. Fibre Channel SFP Copper Transceiver Module (AMP, J34, J35)
USFibre Channel Connector (J34) Pin Assignments Fibre Channel SFP Receptacle (J34, J35)
Fibre Channel CONNECTOR
Pin # Signal Name
1 Signal Ground
2 Transmitter Fault
3 Transmitter Disable Input
4 Module Definition 2
5 Module Definition 1
6 Module Definition 0
7 Rate Select (not implemented)
8 Loss of Signal
9 Signal Ground
10 Signal Ground
11 Signal Ground
12 Received Data Out Bar
13 Received Data Out
14 Signal Ground
15 Receiver Power Supply
16 Transmitter Power Supply
17 Signal Ground
18 Transmitter Data In
19 Transmitter Data In Bar
20 Signal Ground