Filter
Top Products
OCPRF100 MP Server System Technical Product Specification
Revision 1.0
22
F Fan fault LED (yellow) When lit, indicates either a fan failure, or that a predictive fan failure has
been detected in the server.
G Drive fault LED (yellow) When continuously lit, indicates an asserted fault status on one or more
hard disk drives in the hot-swap bay. When flashing, indicates drive rebuild
in progress.
H Front panel LCD Displays information about processor type and failure codes.
(Items I through L on are control buttons for the CD-ROM, and the location may vary from manufacturer to manu-
facturer.)
3.5-inch Floppy Diskette Drive Descriptions
M Activity LED When lit, indicates the drive is in use.
N Ejector button When pressed, ejects the diskette.
Status LEDs for SCSI Drives in Hot-swap Bays
O Drive power LED
(green)
When continuously lit, indicates the presence of the drive and that drive is
powered on.
P Drive activity LED
(green)
When flashing, indicates drive activity.
Q Drive fault LED (yellow) When continuously lit, indicates an asserted fault status on one or more
hard disk drives in the hot-swap bay. When flashing, indicates that drive
rebuild is in progress.
Table 3-2: System Features – Front