Filter
Top Products
OCPRF100 MP Server System Technical Product Specification
Revision 1.0
41
4.1 Cables
Table 4-1 through Table 4-3 list flat ribbon cables and wire bundles that are used in the assembly
of the OCPRF100 MP server system.
Table 4-1: Flat Ribbon Cables
Quantity
Number
of Pins Type Path
1 68 Wide SCSI cable w/VHDCI
interconnect module (solid
core)
Routes from the PHP I/O carrier to a panel cut in the
back of the system, where a VHDCI interconnect mod-
ule can link an external VHDCI cable with the internal
SCSI devices.
1 68 Wide SCSI cable (solid core) From the PHP I/O carrier to the peripheral bay back-
plane.
1 40 IDE cable (long) From the I/O carrier to the peripheral bay backplane.
1 40 IDE cable (short) From the LVDS backplane to the IDE CD-ROM.
1 34 Floppy drive cable (long) From the I/O carrier to the peripheral bay backplane.
1 34 Floppy drive cable (short) From the LVDS backplane to the floppy drive.
1 40 Flat ribbon cable (LED board) From the I/O board to the PHP LED board
Table 4-2: Wire Bundles
Quantity
Number
of Pins Type Path
1 4 Power cable From the LVDS backplane
to the CD ROM and floppy
drive.
1 20 Power cable From the midplane to the
peripheral bay backplane.
Table 4-3: Optional Cable
Quantity
Number
of Pins Type Path
1 50 Narrow SCSI cable From the LVDS backplane to the 5-1/4" device bay, if an
IDE device is not present.