Filter
Top Products
9-22
Setup, Registration, and User Management > System Menu
IPSec
Secure Protocol
LAN Interface
Interface Block Setting
This allows you to protect this machine by blocking the interface with external devices such as USB hosts or optional
interfaces.
Item Description
IPSec Make this setting when you use IPSec.*
Value: Off, On
* After changing the setting, restart the system or turn the machine OFF and then ON.
Item Description
SSL Select whether or not to use SSL.*
Value: Off, On
* After changing the setting, restart the system or turn the machine OFF and then ON.
IPP Security Select the IPP security level. This setup is available when SSL is [On].*
Value: IPP/IPP over SSL, IPPoverSSL only
HTTP Security Select the HTTP security level. This setup is available when SSL is [On].*
Value: HTTP/HTTPS, HTTPS Only
LDAP Security (Ext. Address
Book)
Select the type of encryption according to the type of security employed by the LDAP server.
This setup is available when SSL is [On].*, **
Value: Off, LDAPv3/TLS, LDAP over SSL
** LDAP must be set to [On] in Protocol Detail on page 9-20.
LDAP Security (User Property)
Item Description
LAN Interface Specify the settings for the LAN interface to be used.*
Value: Auto, 10Base-Half, 10Base-Full, 100Base-Half, 100Base-Full, 1000BASE-T
* After changing the setting, restart the system or turn the machine OFF and then ON.
Item Description
USB Host This locks and protects the USB memory slot (A1) or USB port (A2) (USB host).
Value: Unblock, Block
USB Device This locks and protects the USB interface connector (B1) (USB Device).
Value: Unblock, Block
Optional Interface 1 This locks and protects the optional interface slots (OPT1 or OPT2).
Value: Unblock, Block
Optional Interface 2