Filter
Top Products
9-56
Setup, Registration, and User Management > User Login Administration
Obtain Network User Property
Set the required information to obtain the network user property from the LDAP server.
1
Display the screen.
1 Referring to User Login Settings on page 9-34, display the screen.
2
2
Configure the function.
[Server Name]
Up to 64 characters can be entered.
Refer to Character Entry Method on page 11-7 for details on entering characters.
NOTE
To obtain the network user property from the LDAP server, [Network Authentication] must be selected for the
authentication method and [NTLM] or [Kerberos] must be selected as the server type in Enabling/Disabling User Login
Administration on page 9-35.
Server Name*
* If using Active Directory of Windows, the server name may be same as the server name entered in the network authentication.
Enter the LDAP server name or the IP address (up to 64 characters).
Port Set the LDAP port number or use the default port 389.
Name 1**
** If using Active Directory of Windows, displayName of Attribute may be used as Name 1.
Enter the LDAP Attribute to obtain the user name to be displayed from the LDAP server (up to 32
characters).
Name 2***
*** Name 2 can be left out. When you assign displayName in Name 1 and department in Name 2, and if the value of displayName
is "Mike Smith" and the value of department is "Sales" in Active Directory of Windows, the user name appears as Mike Smith
Sales.
E-mail Address****
**** If using Active Directory of Windows, mail of Attribute may be used as E-mail Address.
Enter the LDAP Attribute to obtain the e-mail address from the LDAP server (up to 128 characters).
Search Timeout Set the amount of time to wait before time-out in seconds (from 5 to 255 seconds).
GB0435_01
Obtain NW User Property
10:10System Menu/Counter.
< Back
2/2
Off
User Login/Job Acco... - User Login Setting
User Login Setting - Obtain NW User Property
10:10System Menu/Counter.
On
Off
Cancel
1/1
OK
GB0691_00
1
2
Use [ ] or [ ] to scroll up and down.
Obtain NW User... - LDAP Server Information
10:10
Cancel
System Menu/Counter.
Port
Name 1
Name 2
Server Name
389
displayName
< Back
1/2
OK
GB0692_00
GB0057_34
1
2
3