Filter
Top Products
PCL4 Emulation (2002 only)
PC Printing & Scanning 5 - 9
PCL4 Emulation (2002 only)
PCL4 emulation provides 300 dpi resolution, which is adequate for printing text. If you
are printing a document that contains several graphics, you might prefer to use the GDI
driver, which provides a higher (600 dpi) resolution or the PCL5e option. See “GDI
Printer Feature” on page 5-7 for details.
Connecting to a Computer
Follow these instructions to install the cables.
CAUTION
Never connect or disconnect cables with the power to either unit ON.
1
Close all the open programs on the PC.
2
Be sure power to the computer and the fax unit are OFF.
3
Connect the parallel cable to the parallel connector (bottom port) on the your unit.
4
Connect the other end of the cables to the parallel port on the PC.
5
Turn power on to both the computer and the fax machine.
CAUTION
Static electricity can degrade your MFD unit operations and/or damage
the unit. When the cable is not connected to your fax unit, cap the
connector to guard against static electricity.