Filter
Top Products
2 SIDED TX. Key
3 - 16 Advanced Facsimile
2 SIDED TX. Key
If 2 Side TX LED is lit during memory TX scanning, you can scan the image of one side
of all the pages of the document, then turn the pages over (in the same direction), and your
unit will automatically send a collated set to the remote location.
1
With your unit at a ready condition, place you
document in the Document Feed Tray and make
any other selections such as Original Type or
Resolution.
2
Turn 2 Sided TX. mode on by pressing the
DELETE/2 SIDED TX. Key.
3
Enter the Fax number of the remote location using
One-Touch, Speed Dial or manual input using the
10-Key Pad.
4
Press START. Your unit scans the first sides into
memory.
5
Turn your pages over so that it enters your machine in the same direction, but scans
the second side.
Note: There is a time limit on how long your unit waits until it senses the pages
have been placed back into the ADF.
Note: Even though it is scanning the back sides in reverse order, your unit
compiles them back into the original sequence prior to sending them.
NOV.06 15:38 100%
-SET DOC. FACE DOWN-
05 06 07 08
/2 SIDED TX.SNO CODE
PIN
DELETE
2 SIDED TX.
JO
P
SCHEDULE
<
RESOLUTION
P
FINE
STD
EX-FINE