Filter
Top Products
Machine Operations
Facsimile Programming 4 - 9
Setting the Power Save Mode
This program allows the user to set their fax unit to automatically enter the power saving
mode at a specified time. You can also set the Power Save Mode to OFF. If the ON time
and the OFF time are set the same, the Power Save Mode will remain ON continuously.
1
Press the PROGRAM Key and scroll through the
menus until you reach the Machine Operations
menu and press YES.
2
Press 4 or press the down arrow four times to reach
the Power Saver Mode Menu. Press YES.
3
Use the Left/Right Arrow Keys to select either OFF
or TIMER and press YES.
Note: The ON time refers to the time the unit will go into Power Saver Mode. The
OFF time is the time it will re-enter a READY or STANDBY mode.
4
Enter the time you wish the unit to enter Power
Saver Mode and press YES.
5
Enter the time you wish the unit to leave Power
Saver Mode and return to normal operation.
Selecting Remote Monitor
This function allows service personnel to access the unit remotely. It is possible for the
Service Representative to monitor and change machine settings. This allows them to fix
your unit over the telephone.
1
Press the PROGRAM Key and scroll through the
menus until you reach the Machine Operations
menu and press YES.
2
Press 5 or press the down arrow five times to reach
the Remote Monitor Menu. Press YES.
MACHINE OPERATION?
YES / or 1-7
4 POWER SAVE MODE?
OK=YES
OFF *TIMER
-SELECT&PUSH”YES”-
ON TIME=_0:00
OK=YES
OFF TIME=_0:00
OK=YES
MACHINE OPERATION?
YES / or 1-7
5 REMOTE MONITOR?
OK=YES