Filter
Top Products
Sending a Document
Basic Operations 2 - 3
Direct (Non-Memory) Transmit
Direct Transmission, from the Automatic Document Feeder (ADF), bypasses the unit’s
memory. This can be used to transmit a fax when memory is full. If you anticipate that
there might not be enough memory to scan a particular document into memory (for
example, lengthy documents), transmit it directly form the ADF. Be sure the LED for
Memory TX is OFF before starting transmission.
1
Place your document face down on the Document Feed Tray.
2
Adjust the Document Side Guides to the edges of the document.
3
Use the TYPE ORG. Key to select the desired contrast.
4
Use the RESOLUTION Key to select the desired resolution.
5
Press the MEM.TX Key to turn OFF the memory
use.
6
Enter the remote Fax number one of the following
methods: Speed Dial, One-Touch, Redial or
manually using the 10-Key Pad.
•
The unit scans the first page of the document
and sends it.
•
This continues until the last page has been sent.
•
The unit automatically returns to standby mode when finished transmitting.
7
To stop a transmission already in progress, press
the STOP Key.
DARK
TYPE ORG.
RNAL
OTO
REPORT
>
<
OTO LIGHT NORM
MEM. TX.
<
AUTO RX.
MEM. TX. AL
ENTER FAX NO.
or FUNCTION
TX CANCEL?
YES/CONTINUE=NO