Filter
Top Products
RX Operation
Facsimile Programming 4 - 33
Continuous Poll RX
Poll the specified location with pre-set timer. Up to 10 groups can be set for polling, and
each group can set 10 locations.
1
Press the PROGRAM Key and scroll through the
menus until you reach the RX Operation Menu.
Press YES to begin programming.
2
Press 10 or scroll down to the Continuous Polling
RX menu and press YES.
3
Enter the Poll Group number you will to assign to
this group and press YES.
4
The next screen indicates that this Poll Group is not
active. Press YES to continue.
5
Select a start day to begin polling. Press YES to
continue.
6
Select a stop day to finish polling. Press YES to
continue.
7
Enter a start time to begin polling. Press YES to
continue.
8
Enter a stop time to finish polling. Press YES to
continue.
9
Enter the number of minutes between each redail.
Press YES to continue.
10
Enter the remote fax number to be polled.
11
Press YES to continue.
RX OPERATION?
YES / or 1-9
10 CONTI. POLLING RX?
OK=YES
POLL GROUP NO.=_1
OK=YES /or 01-10
POLL GROUP 01 =OFF
OK=YES(Fin.=START)
SEL. START DAY=SUN.
OK=YES / or 0-6
SEL. STOP DAY=SUN.
OK=YES / or 0-6
START TIME=_0:00
OK=YES (DEL=NO)
STOP TIME=_0:00
OK=YES (DEL=NO)
REDIAL TIME=1 Min.
OK=YES / or 1-8
ENTER POLLING FAX NO.
NO.001=_
OK=YES (DEL=NO)