Filter
Top Products
RX Operation
4 - 28 Facsimile Programming
4
To select Memory RX ON, use the left and right
Arrow Keys to select ON and press YES.
5
Enter the time you wish to start receiving messages
into memory.
Note: If the ON and OFF time are identical,
messages will always be received into memory.
6
Enter the time you wish to stop receiving messages
into memory.
7
If a password was set for this feature, you have to enter it for this to work. If you
need a password, contact your Key Operator.
8
If you have your unit programmed for Memory RX
with the Timer turned ON, your screen shows the
following message.
9
If you have your unit programmed for Memory RX
with the Timer turned ON and a Password required,
your screen shows the following message.
10
The ready message for your unit now shows that
Memory RX is active.
*ON OFF
-SELECT&PUSH”YES”-
ON TIME=_0:00
OK=YES
OFF TIME=_0:00
OK=YES
*M-RX-ON*
<T>
*M-RX-ON*
<T><PWD>
<<M-RX>> 100%
-SET DOC.FACE DOWN-