Filter
Top Products
Document Scan Settings
4 - 14 Facsimile Programming
Reduction Copy
This function allows you to have the document printed by one of the two modes
described below:
Note: Reduction copy capabilities are not available when the resolution setting is
set to Half Tone.
1
Press the PROGRAM Key and scroll through the
menus until you reach the SCANNING &
PRINTING Menu. Press YES to begin
programming.
2
Press 4 or scroll down to the Reduction Copy menu
and press YES.
3
Using the Left and Right arrows, select the option
you wish to have as the default and press YES to
enter this selection into memory.
Choices Available Description
ON The facsimile machine will reduce the copy document
as needed to fit on the paper. The maximum reduction
proportion is 70%. If greater reduction is needed, then
the remainder of the document will be printed on the
next page.
OFF The facsimile machine will not reduce the copy
document and will instead print the remainder of the
document on the next page.
SCANNING&PRINTING?
YES / or 1-5
4 REDUCTION COPY?
OK=YES
*ON OFF
-SELECT&PUSH”YES”-