Filter
Top Products
Setting Up the (Optional) PFU
A - 14 Unpacking & Installation
Loading the Cassette
1
Remove the Cassette from the vinyl bag.
2
Remove the shipping tape and cardboard.
Note: To remove the Baseplate retaining cardboard, carefully slide them forward and
then remove.
3
Press down the Baseplate until it
locks into position.
4
Place a sheet of paper on the
baseplate and check to see that the
Cassette is set for that paper size.
Note: Refer to the Specifications for
appropriate paper sizes.
5
To change the Cassette Paper size,
remove the necessary screws and re-
position the guides for the new size.
Note: Do not overtighten the screws. They can strip out if care is not taken.
6
Fan the paper stack thoroughly and align its edges.
7
Load the paper into the Cassette.
Note: If you are using pre-printed
stock such as letterhead, place the
side to be printed face down.