Lanier 2002 Fax Machine User Manual


 
Document Scan Settings
Facsimile Programming 4 - 13
Scan Contrast
There are three contrast levels of Light, Normal, Dark that you can select depending on
your original document. For documents with very fine or light characters, choose a
lighter level.
1
Press the PROGRAM Key and scroll through the
menus until you reach the SCANNING &
PRINTING Menu. Press YES to begin
programming.
2
Press 2 or scroll down to the Scan Contrast menu
and press YES.
3
Using the Left and Right arrows, select the contrast
you wish to have as the default and press YES to
enter this selection into memory.
Print Density
Set the print density according to your needs. There are six printing density levels
ranging from Light to Dark.
1
Press the PROGRAM Key and scroll through the
menus until you reach the SCANNING &
PRINTING Menu. Press YES to begin
programming.
2
Press 3 or scroll down to the Print Density menu
and press YES.
3
Using the Left and Right arrows, select the density
you wish to have as the default and press YES to
enter this selection into memory.
SCANNING&PRINTING?
YES / or 1-5
2 SCAN CONTRAST?
OK=YES
LIGHT *NORMAL DARK
-SELECT&PUSH”YES”
SCANNING&PRINTING?
YES / or 1-5
3 PRINT DENSITY?
OK=YES
*STD FINE EX-FINE
-SELECT&PUSH”YES”