Lanier 2002 Fax Machine User Manual


 
HOOK Key
Advanced Facsimile 3 - 17
HOOK Key
The Hook Key allows the user to transmit manually. The Hook Key also allows you to
verify that the line is properly connected by enabling you to hear signals from the speaker
built into the fax machine.
1
With your unit at a ready condition, press the Hook
Key.
2
Enter the number of the remote unit you wish to
transmit to using a One-Touch Key, Speed Dial
Key or manually entering it using the 10-Key Pad.
3
Once the remote machine has answered, press the
START Key to begin the transmission.
4
Press the Right Arrow Key to Confirm the location
this message is being set to.
While the message is being sent you can hear
the tones and this message appears.
While the message is being sent you can hear
the tones and this message appears.
NOV.06 15:38 100%
-SET DOC. FACE DOWN-
7
X
64
32
HOOK
¡¯
24
56
P
TEL DIR
REDAIL
/PAUSE
GHI
PQRS
4
8
OPER
0
TUV
JKL
5
OFF HOOK
(DALLAS)
-PUSH START Key-
001[14:55] B-CAST
DELETE or (CONF.= )
001=DALLAS
CHECK FINISH=YES
(DALLAS)