Filter
Top Products
Dial Registration
Facsimile Programming 4 - 19
Program Dial
Instead of their regular functions, any of the last eight One-Touch Keys (57-64) can be
used as Program Keys. Transmission functions including: Broadcast, Timer TX
(Delayed Transmission), Mailbox, Polling RX, and Relay Initiation can be programmed
into the programmed One-Touch Keys. This allows you to “One-Touch” an operation
that normally takes multiple key strokes.
Settings entered into these program keys remain in memory for future use.
Entering
1
Press the PROGRAM Key and scroll through the
menus until you reach the DIAL REGISTRATION
Menu. Press YES to begin programming.
2
Press 4 or scroll down to the Program Dial menu
and press YES.
3
Press the One-Touch Key you wish to use.
Remember, it must be one of the last eight.
4
Choose the function you wish to program:
1=Broadcast, 2=Timer TX, 3=Mailbox TX,
6=Polling RX, and 7=Relay Initiate.
Note: To continue with this process, choose the group of steps that match your needs.
For 1=Broadcast:
5
A screen appears to confirm Broadcast was your
selection.
6
Enter the Key(s) you wish included in this group.
Remember, you can include any One-Touch, Speed
Dial, or Phone Book entry already in memory.
7
Continue to enter the locations you wish to include and then save. You are given the
opportunity to program additional locations. Continue to enter additional Speed Dial
locations or press NO to exit.
DIAL REGISTRATION?
YES / or 1-5
4 PROGRAM DIAL?
OK=YES
-SELECT REGIST.KEY-
FUNCTION
SEL. 1/2/3/6/7
BROADCAST
NO.001=_