Filter
Top Products
Receiving a Document
Basic Operations 2 - 9
Manual Receive
In the manual receive mode, you can talk to the caller and start the receive the document
after the conversation is over.
1
When your unit rings, answer the phone.
2
If it is evident that it is a fax transmission, press the
START Key on your unit and then replace the
phone on the cradle.
•
An intermittent tone after picking up the
handset indicates a fax call.
•
When your unit recognizes the signal as a fax
call, the LCD shows this message.
•
If the sending location is recognized, the blank
is filled in with the name or telephone number
of the location.
•
When the transmission is complete this message
is displayed. The number at the end of the
second line indicates the number of pages sent.
•
When the document starts to print the following
message is displayed. The return of the second
line shows that other operations such as sending
a Fax or making a copy are now available.
•
When the final page prints, the display shows
the following message. The number shows the
number of pages printed.
NOV.07 12:34 100%
-SET DOC. FACE DOWN-
*TALKING*
( ) 100%
-SET DOC. FACE DOWN-
(CHICAGO) 100%
-SET DOC. FACE DOWN-
*RX COMPLETE*
CHICAGO 20P
*PRINT DOC* 90%
-SET DOC. FACE DOWN-
*PRINT COMPLETE*
20P