Filter
Top Products
Operation Panel
Introduction 1 - 9
Message Display
The Message Display shows operational status, error messages, and function menus.
•
Do not apply a strong shock or a force of about 30N (about 3kgf) or more to the panel
display. Otherwise, the display might be damaged.
1 Operation and Error Messages are displayed.
2 Cursor keys.
Items can be selected or specified. These keys correspond to the keys that are in the bottom line of the display.
•
The selected item is highlighted on the panel display.
Basic Key Operations
The following table shows basic key operations.
Ready Q’ty: 1
Auto 11x17 8 1/2x14 8 1/2 x 11
Select with < >
100%
1
2
[Enter #]
key Press this key to set the function or numeric value, and the
previous display appears.
[Escape]
key Press this key to cancel the function or numeric value, and the
previous display appears.
[Up and Down
Arrow]
keys
If all functions cannot be displayed, press these keys to switch to
the previous or next page.
Increase or decrease the counter on the display panel.
[Cancel]
key Press this key to cancel the function, and previous display appears.
[Exit]
key Press this key to set the function or numeric value, and normal
display screen appears.