Filter
Top Products
PostScript - Setting Up for Printing
5 - 8 Setting Up Printer Driver
Making Printer Settings from an Application
To make the printer settings for a specific application, open the Printer Setting dialog box from
that application. The following example describes how to make settings for the Write application
that comes with Windows 3.1x.
•
The actual procedures you should follow to open the Printer Setting dialog box may
differ depending on the application. For details, see the documentation that comes with
the application you are using.
•
When you use some applications, the driver's initial default settings of the applications
might be applied over the printer driver's setting.
•
Any settings you make in the following procedure are valid for the current application
only.
1
On the [File] menu, click [Print Setup].
•
The [Print Setup] dialog box appears.
2
From the [Printer] group, select the printer you want to use.
•
If the printer you want to use is not specified as the default printer, click [Specific
Printer:], and then find the printer you want to use in the list box.
3
Click [Options].
•
The Printer Setting dialog box appears.
4
Set desired settings and click [OK].
5
Click [OK] to close the [Print Setup] dialog box.
6
Start your printing.