Filter
Top Products
Additional Printing Problems
6 - 14 Troubleshooting
Additional Printing Problems
Problem Action
It takes a long time for the
printer to start printing.
The machine might be in Energy Saver mode or Low
Power mode, which requires more time for warming
up and resuming the print job. If you can't wait,
change the settings of Low Power, Shift Time and
Low Power Timer.
It takes too much time to
complete the print job.
The data is so large or complex that it takes time to
process it.
If the Data In indicator is blinking, the data processing
is being done.
Just wait until it is finished.
Windows 95/98, NT 4.0 :
The computer doesn't
recognize the installed
printer options.
If the connection to the printer is not bi-directional,
the computer does not recognize the installed printer
options.
Setting of the options might not be specified correctly.
In this case, specify which options you have installed
using the printer driver.
For more information on the setting options with
installing the printer driver. See “Installing the PCL 6/
5e Printer Driver” on page 3-4 and, “Installing the
PostScript Printer Driver” on page 3-8
Windows 3.1x:
The print job can't be sent.
The memory buffer might be full. Remove the check
mark from the
[Use Print Manager]
check box, or make
the time out setting longer.