Filter
Top Products
1 Simple-swap hard disk drive 6 Hard disk drive activity LED
2 DVD drive activity LED (green) 7 System error LED
3 Front information panel 8 USB 2
4 Power-on LED 9 USB 1
5 Power-control button 10 DVD-eject button
DVD drive activity LED: When this LED is lit, it indicates that the DVD drive is in
use.
System-power LED: When this LED is lit and not flashing, it indicates that the
server is turned on. When this LED is flashing, it indicates that the server is turned
off and still connected to an ac power source. When this LED is off, it indicates that
ac power is not present, or the power supply or the LED itself has failed. A
system-power LED is also on the rear of the server.
Power-control button and power-on LED: Press this button to turn the server on
and off manually or to wake the server from a reduced-power state. The states of
the power-on LED are as follows:
Off: AC power is not present, or the power supply or the LED itself has failed.
Flashing rapidly (4 times per second): The server is turned off and is not
ready to be turned on. The power-control button is disabled. This will last
approximately 1 to 3 minutes.
Flashing slowly (once per second): The server is turned off and is ready to be
turned on. You can press the power-control button to turn on the server.
Lit: The server is turned on.
16 ThinkServer TS200 Types 6522, 6523, 6524, 6525, 6526, 6528, 6529, and 6530: Installation and User Guide