Filter
Top Products
Disk recovery takes place in several phases. The percentage completed during each phase appears on the display.
Empty hole punch box
Empty the hole punch box, and then reinsert it into the finisher. Wait for the message to clear.
Note: To learn how to empty the hole punch box, press
repeatedly until Show Me appears, and then press .
Enabling Menus
Wait for the message to clear.
Encrypting disk x/y XX% DO NOT POWER OFF
Wait for the message to clear.
Warning: Do not power off while the printer is encrypting the printer hard disk.
The percentage completed appears on the display.
Enter PIN
Enter the PIN you created in Print Properties when the confidential job was sent for printing.
Enter PIN to lock
Enter the PIN you created to lock the control panel and prevent menu changes.
Error reading USB drive
Remove the device and wait for the message to clear. The USB drive may be corrupted.
Flushing buffer
Wait for the message to clear.
Formatting Disk x/y XX% DO NOT POWER OFF
Wait for the message to clear.
Warning: Do not power off while the printer is formatting the printer hard disk.
The percentage completed appears on the display.
Formatting Flash DO NOT POWER OFF
Wait for the message to clear.
Warning: Do not power off while the printer is formatting the flash memory.
Incorrect orientation
Change the orientation of the paper in the tray or the position of the paper guides. Make sure the print job is requesting
the correct paper size.
Insert hole punch box
Insert the hole punch box into the finisher. Wait for the message to clear.
Note: To learn how to insert the hole punch box, press
repeatedly until Show Me appears, and then press .
Insert Tray <x>
Insert the specified tray into the printer.
111