Filter
Top Products
Menu item Description
Staple Job
Off
Auto
Front
Back
2 Staples
4 Staples
Specifies the number and position of staples on a print job
Notes:
• This menu is available only when the finisher is installed.
• Off is the factory default setting. Print jobs are not stapled.
• Auto corner staples every print job.
• Envelopes are not stapled.
Hole Punch
On
Off
Specifies whether a print job receives hole-punch finishing
Notes:
• This menu is available only when the finisher is installed.
• Off is the factory default setting. Print jobs are not hole punched.
• The On setting instructs the finisher to hole punch every print job.
Hole Punch Mode
2 holes
3 holes
4 holes
Specifies the number of holes punched
Notes:
• 3 is the US factory default setting. The 3 holes setting is available only for
the 3-hole finisher.
• 4 is the international factory default setting. The 4 holes setting is available
only for the 4-hole finisher.
• This menu is available only when the finisher is installed.
Offset Pages
None
Between Copies
Between Jobs
Stacks copies or print jobs into staggered sets in an output bin
Notes:
• None is the factory default setting. No pages are offset during the print job.
• Between Copies offsets each copy of a print job.
• Between Jobs offsets each print job.
Quality menu
Menu item Description
Print Mode
Color
Black Only
Specifies whether images are printed in monochrome grayscale or in color
Note: Color is the factory default setting.
Color Correction
Auto
Off
Manual
Adjusts the color output on the printed page
Notes:
• Auto is the factory default setting. Auto applies different color conversion
tables to each object on the printed page.
• Off turns off color correction.
• Manual allows customization of the color tables using the settings available
from the Manual Color menu.
• Due to the differences in additive and subtractive colors, certain colors that
appear on computer monitors are impossible to duplicate on the printed page.
87