Filter
Top Products
37 Insufficient memory to collate job
• Press until Continue appears, and then press to print the portion of the job already stored and begin
collating the rest of the print job.
• Cancel the current print job.
37 Insufficient memory, some held jobs will not be restored
The printer was unable to restore some or all of the confidential or held jobs on the printer hard disk.
Press
until Continue appears, and then press to clear the message.
38 Memory full
• Press until Continue appears, and then press to clear the message.
• Cancel the current print job.
• Install additional printer memory.
39 Page is too complex to print
• Press until Continue appears, and then press to clear the message and continue printing.
• Cancel the current print job.
• Install additional printer memory.
50 PPDS font error
• Press until Continue appears, and then press to clear the message and continue printing.
• The printer cannot find a requested font. From the PPDS menu, select Best Fit, and then select On. The printer
will find a similar font and reformat the affected text.
• Cancel the current print job.
51 Defective flash detected
• Press until Continue appears, and then press to clear the message and continue printing.
• Cancel the current print job.
52 Flash full
• Press until Continue appears, and then press to clear the message and continue printing.
Downloaded fonts and macros not previously stored in flash memory are deleted.
• Delete fonts, macros, and other data stored in flash memory.
• Upgrade to a larger capacity flash memory card.
53 Unformatted flash detected
• Press until Continue appears, and then press to stop the defragment operation and continue printing.
• Format the flash memory. If the error message remains, the flash memory may be defective and require
replacing.
117