Filter
Top Products
Menu item Description
Factory Defaults
Do Not Restore
Restore
Returns the printer settings to the factory default settings
Notes:
• Do Not Restore is the factory default setting. Do Not
Restore keeps the user-defined settings.
• Restore returns all printer settings to the factory default
settings except Network/Ports menu settings. All
downloads stored in RAM are deleted. Downloads stored
in flash memory or on a printer hard disk are not affected.
Finishing menu
Menu item Description
Duplex
On
Off
Specifies whether duplex (2-sided) printing is set as the default for all print jobs
Notes:
• Off is the factory default setting.
• To set 2-sided printing from the software program, click File Print, and
then click Properties, Preferences, Options, or Setup.
Duplex Bind
Long Edge
Short Edge
Defines the way duplexed pages are bound and how the printing on the back
of the page is oriented in relation to the printing on the front of the page
Notes:
• Long Edge is the factory default setting.
• Long Edge specifies that binding be placed on the left edge of portrait
pages and the top edge of landscape pages.
• Short Edge specifies that binding be placed on the top edge of portrait
pages and the left edge of landscape pages.
Copies
1–999
Specifies a default number of copies for each print job
Notes:
• 1 is the factory default setting.
• To specify the number of copies for a specific print job, from the software
program, click File Print, and then click Properties, Preferences,
Options, or Setup. Software settings always override control panel
settings.
Blank Pages
Do Not Print
Print
Specifies whether blank pages are inserted in a print job
Note: Do Not Print is the factory default setting.
Collation
On
Off
Stacks the pages of a print job in sequence when printing multiple copies
Notes:
• Off is the factory default setting. No pages will be collated.
• The On setting stacks the print job sequentially.
• Both settings print the entire job the number of times specified by the Copy
menu setting.
85