Filter
Top Products
Bin 1 finishing features
Size
Punch
*
Offset Single/double staple Double dual staple
A3
A4
A5 X X X X
Executive X
Folio X X
JIS B4 X
JIS B5 X
Legal X X
Letter
Statement X X X
Tabloid X
Universal
Envelopes (any
size)
X X X X
*
For the Universal paper size, the finishing edge must be at least 9 in. (229 mm) for a 3-hole punch and 10 in.
(254 mm) for a 4-hole punch.
Punch—Two-, three-, or four-hole punch settings
Single staple—One staple
Double staple—Two staples
Double dual staple—Two sets of two staples. This setting is supported only for widths between 8 in. (203 mm)
and 11.7 in. (297 mm) with lengths between 7.2 in. (182 mm) and 17 in. (432 mm).
Bin 2 (booklet-maker)
Bin 2 is available only when the booklet finisher is installed. The paper capacity of Bin 2 (booklet-maker) is 300
sheets or 20 sets of 15-sheet booklets.
Bin 2 finishing features
Size Bi fold Booklet fold Saddle staple
A3
A4 (only SEF)
SEF—The paper is loaded in the short edge orientation. The short edge of the paper enters the printer first.
Bi fold—Each page is individually folded and stacked separately.
Booklet fold—A multiple-page job is folded along the center into a single booklet.
Saddle staple—A booklet-fold print job is stapled along the center fold.
44