Filter
Top Products
5 Press repeatedly until Units of Measure appears, and then press .
6 Press repeatedly until appears next to the correct unit of measure, and then press .
Submitting Selection appears, followed by the Universal Setup menu.
Specify the paper height and width
Defining a specific height and width measurement for the Universal paper size (in the portrait orientation) allows the
printer to support the size, including support for standard features such as duplex printing and printing multiple pages
on one sheet.
1 From the Universal Setup menu, press repeatedly until Portrait Width or Portrait Height appears,
and then press
.
Note: Select Portrait Height to adjust the paper height setting or Paper Width to adjust the paper width
setting.
2 Press to decrease the setting or to increase the setting, and then press .
Submitting Selection appears, followed by the Universal Setup menu.
Specify a feed direction
Short Edge is the factory default setting for feed direction for Universal paper settings. The Feed Direction menu will
not appear from the Universal Setup menu unless Long Edge is an available setting. If necessary, specify whether
the short or long edge of the paper will enter the printer first.
1 From the Universal Setup menu, press repeatedly until Feed Direction appears, and then press .
2 Press repeatedly until appears next to the correct feed direction, and then press .
Submitting Selection appears.
24