Filter
Top Products
Chapter 4
Using Your Motion Tablet PC
Motion Computing M1400 Tablet PC User Guide 31
mode. Choose Hibernate when you plan to stop work for longer periods
of time, such as overnight. This setting saves the status of the Tablet PC
system to the hard disk drive.
Launching Stand By or Hibernate Mode from the Start Button
1. Select Start>Shut Down.
2. From the pop-up window, open the drop-down menu and select
Stand By. (If you are not on a domain, the pop-up window displays
icons for Stand By/Turn Off/Restart. Press the Shift key on the key-
board and toggle to Hibernate.)
3. The Tablet PC will then enter Stand By or Hibernate. In Stand By, the
power LED flashes green. In Hibernate, all the status LEDs
are off.
IMPORTANT: You can put the Tablet PC in either Stand By or Hibernate to swap
the battery. See the section “Swapping the Battery” in this chapter.
Launching Stand By Mode from the Motion Dashboard
Open the Motion Dashboard and then tap the Stand By button.
Setting Up Stand By or Hibernate Mode from the Power Switch
When you slide the power switch, by default your Tablet PC shuts down.
You can change this setting so that you can enter either Stand By or
Hibernate from the power switch.
1. Open the Motion Dashboard.
2. On the Dashboard, under Power Management, tap the down arrow
beside the Power Button.
3. From the drop-down menu, select Stand By or Hibernate, as desired.
The setting goes into effect immediately.
4. Tap OK to close Dashboard.
Restarting from Stand By or Hibernate Mode
To restart from Stand By or Hibernate mode, briefly slide the power switch
until the Tablet PC display turns on. Tap your user name to resume work.
U
SING THE
M
OTION
D
IGITIZER PEN
The Motion Digitizer Pen contains internal
electronics that let you enter digital ink on the
Tablet PC display. Finger-tapping or writing
with a PDA stylus has no effect. The pen
contains a pen function button, used for right-
clicking (like a mouse) and a small opening at
one end for attaching a pen tether cord. The pen also comes with
replacement pen tips and a replacement tool. For information about
replacing the pen tips, see “Replacing the Pen Tips” in this chapter.