Motion Computing M1400 Laptop User Manual


 
Chapter 4
Using Your Motion Tablet PC
Motion Computing M1400 Tablet PC User Guide 49
CREATING A
SCREEN-
RESOLUTION
SCHEME FOR AN
EXTERNAL
M
ONITOR OR
S
IMILAR DEVICE
To create a special screen resolution scheme:
1. Tap the Properties button under External Display on the Motion
Dashboard. Or, tap the Intel(R) Extreme Graphics 2 for mobile icon
in the system tray, located at the bottom-right corner of the display;
then Graphics Options>Graphics Properties....
2. From the Intel(R) 82852/82855 GM/GME Graphics Controller Prop-
erties window, select the Schemes tab. The current Video Mode is
displayed. (The default mode is 1024 x 768 True Color (60 Hz).
3. Tap the New... button on this window.
4. Type in a name for the new scheme. Tap OK to save the scheme.
5. Highlight this new scheme in the Schemes window.
6. Add or change the parameters for this scheme.
7. Tap Save.
8. To test or launch a scheme, select it from the list and tap the
Invoke button.
9. Tap OK.
SETTING UP A
WIRELESS
CONNECTION
Wireless network access points are available in airports, public businesses,
such as coffee shops, as well as in private companies. With the proper
hardware, you can set up a wireless access point at home. Each access point
may provide various levels of security and may require passwords and/or
fees for connection.
IMPORTANT: Since wireless set ups differ widely, the information presented here
is general and may not cover all the steps required for your wireless configuration.
For more information about wireless networks, you may need to contact your Sys-
tem Administrator. Or, go to Start>Help and Support and search for wireless help
from Microsoft.
Although wireless access is available in public areas, your ability to use the
wireless access point depends on the following conditions:
Distance from the access point
Ability to connect to the access point
Service rights to it (which may require an account fee, user name,
password, an/or network setup through an administrator)
The access point is not broadcasting a network name (SSID: service
set identifier)