Motion Computing M1400 Laptop User Manual


 
Chapter 4
Using Your Motion Tablet PC
Motion Computing M1400 Tablet PC User Guide 85
CLEARING
TABLET PC
SECURITY
To clear the Tablet PC PhoenixBIOS security:
1. Start the Tablet PC.
2. When the Motion Computing Splash Screen
appears, quickly press Hot Key #2. If you miss the
Splash screen, turn the Tablet PC off then back on
and try this step again.
3. From the PhoenixBIOS Setup Utility, tap Security
on the menu bar. If you have rebooted, you will be
prompted to enter the password(s) you have set up.
4. To clear the System and Password on boot pass-
words, double-tap Enter next to Set System Pass-
word.
5. Type in the Current Password.
6. Leave the space blank next to Enter New Password.
7. Tap Enter.
8. Leave the space blank to Confirm New Password.
9. Tap Enter.
10. When the Security screen appears, the System Password should be
Clear and the Password on boot Disabled.
11. To clear the Hard Disk Drive password, double-tap Enter next to Set
Hard Disk Password.
12. Type in the Current Password.
13. Leave the space blank next to Enter New Password.
14. Tap Enter.
15. Leave the space blank to Confirm New Password.
16. Tap Enter.
17. When the Security screen appears, the HDD Password should
now display Clear.
CARING FOR
Y
OUR TABLET
PC AND ITS
A
CCESSORIES
The Tablet PC display and chassis are designed to be very durable. This
section describes the proper care and maintenance that will keep them
working and in good condition for a long time. For general information
about care of the Tablet PC and its components and accessories, see the
Regulatory and Safety Guide packaged with your Tablet PC.
CAUTION: Be sure to follow the guidelines listed below when caring for
your Tablet PC and its components. Improper use may damage the
Tablet PC and/or its components and void the warranty.
General Care
Protect the Tablet PC from exposure to extreme temperatures, shock, liq-
uids, and strong magnetic fields.
Do not open or disassemble the Tablet PC other than to replace memory
modules or to replace the battery. Always follow the instructions
included with these accessories when performing these procedures.