Filter
Top Products
Appendix A Specifications for AT-MIO-16XE-10 and AT-AI-16XE-10
AT-MIO/AI E Series User Manual A-22
National Instruments Corporation
Analog Output (AT-MIO-16XE-10 only)
Output Characteristics
Number of channels ...........................2 voltage
Resolution..........................................16 bits, 1 in 65,536
Max update rate .................................100 kS/s
Type of DAC ....................................Double-buffered
FIFO buffer size.................................2,048 samples
Data transfers.....................................DMA, interrupts, programmed
I/O
DMA modes.......................................Single transfer, demand transfer
Transfer Characteristics
Relative accuracy (INL).....................±0.5 LSB typ, ±1 LSB max
DNL...................................................±1 LSB max
Monotonicity .....................................16 bits, guaranteed
Offset error
After calibration ......................... 305 µV max
Before calibration....................... 20 mV max
Gain error (relative to internal reference)
After calibration ......................... ±30.5 ppm max
Before calibration....................... ±2,000 ppm max
Voltage Output
Range.................................................±10 V, 0 to 10 V (software
selectable)
Output coupling .................................DC
Output impedance ..............................0.1 Ω
Current drive......................................±5 mA
Protection ..........................................Short-circuit to ground
Power-on state ...................................0 V (± 20 mV)