Filter
Top Products
Appendix A Specifications for AT-MIO-16XE-10 and AT-AI-16XE-10
National Instruments Corporation A-25 AT-MIO/AI E Series User Manual
External input (PFI0/TRIG1)
Impedance...................................10 kΩ
Coupling .....................................DC
Protection....................................-0.5 to Vcc +0.5 V when
configured as a digital signal
±35 V when configured as an
analog trigger signal or disabled
±35 V powered off
Accuracy ........................................... ±1% of full-scale range
Digital Trigger
Compatibility .................................... TTL
Response ........................................... Rising or falling edge
Pulse width........................................ 10 ns min
RTSI
Trigger Lines..................................... 7
Bus Interface
Type.................................................. Slave
Power Requirement
+5 VDC (±5%).................................. 1.2 A
Power available at I/O connector....... +4.65 VDC to +5.25 VDC
at 1 A
Physical
Dimensions
(not including connectors).............. 33.8 by 9.9 cm (13.3 by 3.9 in)
I/O connector .................................... 68-pin male SCSI-II type
Environment
Operating temperature....................... 0 to 55°C
Storage temperature........................... -55 to 150°C
Relative humidity.............................. 5% to 90% noncondensing