Filter
Top Products
Index
National Instruments Corporation I -3 AT-MIO/AI E Series User Manual
software programming choices
LabVIEW and LabWindows/CVI,
1-3
NI-DAQ driver software, 1-3 to 1-5
register-level programming, 1-5
unpacking, 1-7
B
base I/O address selection, 2-3
bipolar input
AT-MIO-16E-1, AT-MIO-16E-2,
AT-MIO-64E-3, AT-MIO-16E-10, and
AT-MIO-16DE-10, 3-7 to 3-8
AT-MIO-16XE-10, AT-AI-16XE-10,
and AT-MIO-16XE-50, 3-9 to 3-10
mixing bipolar and unipolar channels
(note), 3-9
bipolar output, 3-14, 3-15
block diagrams
AT-AI-16XE-10, 3-5
AT-MIO-16E-1 and AT-MIO-16E-2, 3-1
AT-MIO-16E-10 and
AT-MIO-16DE-10, 3-3
AT-MIO-16XE-10, 3-4
AT-MIO-16XE-50, 3-6
AT-MIO-64E-3, 3-2
board configuration. See configuration.
bulletin board support, D-1
bus interface specifications
AT-MIO 16E-1, AT-MIO-16E-2 and
AT-MIO-64E-3, A-10
AT-MIO-16E-10 and
AT-MIO-16DE-10, A-17
AT-MIO-16XE-10 and
AT-AI-16XE-10, A-25
AT-MIO-16XE-50, A-31
C
cables. See also I/O connectors.
field wiring considerations, 4-58
optional equipment, 1-5
calibration, 5-1 to 5-3
adjusting for gain error, 5-3
external calibration, 5-2 to 5-3
loading calibration constants, 5-1 to 5-2
self-calibration, 5-2
charge injection, 3-13
clocks, board and RTSI, 3-21
commonly asked questions. See questions
about AT E series boards.
common-mode signal rejection, 4-26
configuration. See also input configurations.
base I/O address selection, 2-3
bus interface, 2-2 to 2-7
common questions about, C-2 to C-3
DMA channel selection, 2-3 to 2-4
interrupt channel selection
PC AT 16-bit DMA channel
assignment map (table), 2-7
PC AT I/O address map
(table), 2-4 to 2-5
PC AT interrupt assignment map
(table), 2-6
Plug and Play systems, 2-3
switchless data acquisition, 2-3
connectors. See I/O connectors.
CONVERT* signal
signal routing, 3-19 to 3-20
timing connections, 4-39 to 4-40
customer communication, xiv, D-1 to D-2
D
DAC0OUT signal
analog output connections, 4-27 to 4-28
AT-MIO-16E-1, AT-MIO-16E-2 and
AT-MIO-64E-3 (table), 4-8
AT-MIO-16E-10 and AT-MIO-16DE-10
(table), 4-10
AT-MIO-16XE-10 and AT-AI-16XE-10
(table), 4-12
AT-MIO-16XE-50 (table), 4-14
description (table), 4-5