Filter
Top Products
Index
National Instruments Corporation I -7 AT-MIO/AI E Series User Manual
I
I/O connectors, 4-1 to 4-15
exceeding maximum ratings
(warning), 4-1, 4-16, 4-29
I/O signal summary (table)
AT-MIO-16E-1, AT-MIO-16E-2,
and AT-MIO-64E-3, 4-8 to 4-9
AT-MIO-16E-10 and
AT-MIO-16DE-10, 4-10 to 4-11
AT-MIO-16XE-10 and
AT-AI-16XE-10, 4-12 to 4-13
AT-MIO-16XE-50, 4-14 to 4-15
signal descriptions (table), 4-5 to 4-8
IBF signal (table), 4-54
input characteristics
AT-MIO-16E-1, AT-MIO-16E-2 and
AT-MIO-64E-3, A-1 to A-2
AT-MIO-16E-10 and AT-MIO-16DE-10,
A-11 to A-12
AT-MIO-16XE-10 and AT-AI-16XE-10,
A-19 to A-20
AT-MIO-16XE-50, A-26
input configurations, 4-18 to 4-26
available input modes, 3-6 to 3-7
DIFF (table), 3-7
NRSE (table), 3-7
RSE (table), 3-7
common-mode signal rejection, 4-26
differential connections
DIFF input configuration, 4-20
floating signal sources, 4-22 to 4-23
ground-referenced signal
sources, 4-21
nonreferenced signal
sources, 4-22 to 4-23
single-ended connections, 4-24
floating signal sources (RSE
configuration), 4-25
grounded signal sources (NRSE
configuration), 4-25
input polarity and range, 3-7 to 3-10
AT-MIO-16E-1, AT-MIO-16E-2,
AT-MIO-643-3, AT-MIO-16E-10, and
AT-MIO-16DE-10, 3-7 to 3-8
actual range and measurement
precision (table), 3-8
AT-MIO-16XE-10, AT-AI-16XE-10,
and AT-MIO-16XE-50, 3-9 to 3-10
AT-MIO-16XE-10, AT-MIO-16XE-50
actual range and measurement
precision (table), 3-10
mixing bipolar and unipolar channels
(note), 3-9
selection considerations, 3-10
installation. See also configuration.
common questions about, C-2 to C-3
hardware installation, 2-1 to 2-2
unpacking AT E series boards, 1-7
interrupt channel selection
overview, 2-4
PC AT 16-bit DMA channel assignment
map (table), 2-7
PC AT I/O address map (table), 2-4 to 2-5
PC AT interrupt assignment map
(table), 2-6
INTR signal (table), 4-54
L
LabVIEW and LabWindows/CVI, 1-3
M
manual. See documentation.
mode 1 input
Port C signal assignments (table), 4-53
timing specifications, 4-55
mode 1 output
Port C signal assignments (table), 4-53
timing specifications, 4-56
mode 2 bidirectional transfers
Port C signal assignments (table), 4-53
timing specifications, 4-57
multiple-channel scanning, 3-12 to 3-13