Filter
Top Products
7-6 Chapter 7: Programming
Programming Tags
After completing the worksheets, enter the information using the
special programming tags contained in the NCR 7800, 7870, 7875, 7880,
and 7890 Programming Tags book (BST0-2121-74). You do not need a
large number of special programming tags, only 5 unique tags and 16
hexadecimal (Hex) character tags. The following identifies each
programming tag, its function, and the associated indicators.
Abort
Function – In Base Programming State
If this tag is scanned in the Base Programming State, programming
is terminated and no previously entered parameters are saved.
Indication – In Base Programming State
•
Short beep as soon as tag is read – Good Read tone
•
Status indicator flashes red twice
•
Four quick beeps from low to high frequency
Function – In Specific Programming Mode
If this tag is scanned in a Specific Programming Mode, all
parameters entered are saved and the NCR 7875 goes to the Base
Programming State.
Indication – In Specific Programming Mode
•
Short beep as soon as tag is read – Good Read tone
•
Status indicator flashes green once
•
Programming returns to Base Programming State.