Filter
Top Products
Chapter 4: Installation
Getting Started
This chapter describes the installation process for the NCR 7870.
Before installation, prepare the site in accordance to the requirements
in Chapter 2 – Site Preparation.
The first step is to perform an inspection to verify that the unit and
checkstand are ready.
Reporting a Damaged Unit
Upon receiving an NCR 7870, inspect the shipping for damage. If the
carton is damaged, open it in the presence of the shipping carrier
before signing the bill of lading. If the scanner/scale has been
damaged due to shipping, notify the carrier and an NCR
representative. If the unit was not purchased directly from NCR,
notify your supplier.
What’s in the Box
Unpack the unit according to the instructions on the box. Inventory
the contents to ensure you have received the following components.
•
NCR 7870 •
Power Cord
•
Top Plate •
Documentation
•
Country Language Specific
IEC Class 1 Laser Labels
(International Units)
•
Metal Foil Stamping Plate
(200x Model International
Units)
•
Power Cord Documents
(International Units)
•
Interface Cable (when cable
feature requested with order)