Filter
Top Products
Chapter 7: Programming 7-75
Terminal Coupon Interface Parameters
Certain parameters must be set to permit the unit to transmit coupon
data to the host terminal. These are in addition to the general
parameters that are required for other scanner/scale functions.
Note:
Selection of optional add-on bar codes may require additional
programming. See Early Beep Disable in the
Special Programming
section for more information.
The first part of setting the Coupon Interface Parameters is
Programming Multi-Symbol Scanning.
1.
Scan the Programming Mode tag.
2.
Scan the Hex 3 and Hex 8 tags to select this parameter.
3.
Scan a Hex 0 through Hex F tag to set a Coupon Select 1 parameter.
Coupon Select 1 Parameter Disable Enable
Coupon with P5 optional Hex 0 Hex 1
Coupon with 128 add-on optional Hex 2 Hex 3
Coupon with 128 add-on mandatory Hex 4 Hex 5
Markdown with 128 add-on optional Hex 6 Hex 7
Program 1 with 128 add-on optional Hex 8 Hex 9
Program 1 with 128 add-on mandatory Hex A Hex B
Program 2 with 128 add-on optional
Hex C Hex D
Program 2 with 128 add-on mandatory Hex E Hex F
4.
Scan the Save and Reset tag to save the program (required).