Filter
Top Products
5-18 Hardware Information
MA4000 Installation Manager User Guide - Revision 6
Signaling Server - SIP Server (Including MPH)
The Signaling Server is enabled when:
• System Type = SV7000 UNIVERGE
• Fusion = NCN -
Network Control Node
The Signaling Server option (Figure 5-15) allows you to define ranges
for the SIP Server. The signaling server helps establish, modify and
terminate IP-base calls. You can use Installation Manager to set basic
signaling server communication parameters.
Figure 5-15
Hardware Information - Signaling Server Tab
NOTE
IMPORTANT
Information entered in the fields on the Signaling Mail tab are for Phase 1
installations only.