Filter
Top Products
5-12 Hardware Information
MA4000 Installation Manager User Guide - Revision 6
Installation Phase The phase the device intends to
install.
Kind The PRI trunk type selected from
the pull-down menu (NI-2, AT&T
- 41459, and DMS - Nortel
A211).
MAC Address The Media Access Control address
for the equipment. The address is
located on the bottom of the
equipment.
Name (Description) Circuit card name.
Network Mask A string of 0's and 1's that mask
or screen out the network part of
an IP address (IP) so that only
the host computer part of the
address remains.
Number of Attendants Consoles The number of attendant consoles
the system contains.
Operate Unit in SIP Mode Initiates an interactive user
session that involves multimedia
elements such as video, voice,
chat, etc.
REGMAX The registration assignment
capacity (1-6144). This maximum
should not exceed the line
capacity of the system. Default is
256.
Repeat Pattern Indicates the sequence of the
announcements the caller should
hear.
Route Name Note. This field can only be
modified if the Service Type is
ANNC.
Route Restrictions (RSC) The restriction classes in the
system.
Send Answer Signal Indicates whether Answer
Supervision should be sent when
an incoming Trunk connects to an
Announcement.
Service Feature Restrictions (SFC)The service feature classes built
into the system.
Service Type How the channel is to be used.
Signal Ch. Route Name The Media Gateway circuit card’s
signal channel route name.
Station Number The number of an available
station number conforming to the
numbering plan.