Filter
Top Products
Hardware Information 5-3
MA4000 Installation Manager User Guide - Revision 6
• System Name field
This is the name of the system. This information will be assigned
internally to the system.
• IP Phone Type field
Allows specification of the IP Phone support needed in MA4000
Installation Manager. This setting determines what options are made
available in other areas of MA4000 Installation Manager.
Example: If there is no IP Phone support needed, you will not have the
option of viewing IP Phone Models in the Phone Model List on
the User Edit Dialog.
The IP Phone Type options will consist of a combination of the
following:
TDM
Requires a PIR. Time Division Multiplex phones are NEC non-IP, circuit
card based Dterm or analog phones.
IP P-P
IP Peer-to-Peer phones are NEC IP phones not requiring circuit cards.
SIP
Session Initiated Protocol are NEC or other vendor IP phones which
conform to SIP standards.
•Name Display and Name Display Length fields
Specify in the Name Display and Length fields the default format for
users with phones having Name Display support.
Connect Type section
This section allows you to specify the communication interface used to
connect to the system.
• TCP/IP option
— Address - IP address of the SV7000 T10 or IPX
— Port - 60000
• Direct option (requires serial cable and is not used for SV7000)
— Comm Port - Serial COM port of the PC which the MA4000
Installation Manager is operating on.
— Baud Rate - Default value is 4800