Filter
Top Products
5-2 Hardware Information
MA4000 Installation Manager User Guide - Revision 6
Project Name field
This is the name of the project database. You can change the database
name, but is recommended it remain as the name of the database. This
field is used in many reports to identify the installation the data is
associated with.
System Type field
Valid choices are NEAX IPX, NEAX IPX DM, UNIVERGE IPX, UNIVERGE
SV7000, and NEAX IPX UMG.
Dual CPU check box
Select to identify when redundant SV7000 T10 processors are used.
Dual Time Division check box
Select to identify when redundant SV7000 T10 processors are
multiplexing.
6 Unit (6U) Physical Chassis check box
• Checked - Indicates 6U Physical Chassis’s are to be used.
• Unchecked - Indicates 9U Physical Chassis’s are to be used
System Options section
This section determines how the system will be programmed, and what
commands will be used. It is used in reporting and consists of:
• Fusion -
Use the Fusion drop-down menu to specify the type of
Fusion network to which your system will connect. The option is not
available on SV7000 MPS. Select one of the following:
—NCN - Network Control Node (F
usion Network NCN)
— LCN - Local Control Node
(Fusion Network LCN)
— Standalone - NEAX IPX/IPX DM or UNIVERGE IPX only
• Fusion Point Co
de (LCN Only)
If the system is to be an LCN in a Fusion Network, select an
appropri
ate Fusion Point Code. It is useful to provide a technician this
information so the system can be configured to support these
features.
• Attendant
— Access to Attendant (Operator Call) - This
is the number of the
company’s operator. This number will be referenced in several
areas as a macro. It is used heavily in templates such as Call
Forwarding.
— Use Monitored Number as Attendant
NOTE