Filter
Top Products
Productivity Features 13-11
MA4000 Installation Manager User Guide - Revision 6
Designating Primary, Secondary, and Tertiary Backup Stations
Users can select multiple Primary stations and assign them to the list.
Step 1
To designate Primary, Secondary, and Tertiary stations, click
New
.
Figure 13-8 displays a list of existing backup stations.
Figure 13-8
Location Diversity - Designating Backup Stations
The TELNs listed in the Primary TELN section shown in Figure 13-8 only display
when a PBX Fusion Point Code is selected from the FPC drop
-down menu.
Step 2
Use the FPC drop-down menu to select the Fusion Point Code of the
PBX containing the station you wish to configure for Location Diversity.
Step 3 Select the primary stations (multiple stations can be selected) from the
TELN/TEC list, then click >> to add it to the Backup Station section.
—Installation Manager’s location diversity automatically finds the
a
vailable pool numbers. If pools are not available, Location Diversity
creates new pools.
Step 4 Click the backup stations (multiple stations can be selected) in the list to
select it, then use the IP-KIND drop-down menu to specify whether the
backup station is a Dterm IP, SIP phone, etc.
Step 5 Click the Secondary drop-down menu to specify the PBX to which the
selected station will attempt to connect if communication with the primary
PBX fails.
NOTE
NOTE