Filter
Top Products
Hardware Information 5-11
MA4000 Installation Manager User Guide - Revision 6
Edit button
Edit the circuit card selected, changing the fields as needed. When you
are satisfied with the changes made, click the OK button to save the
changes.
Circuit Card Field Definitions
Access to Attendant Operator The code system users dial to
reach the attendant.
ANNC Equipment# Specifies what the announcement
is to be used for. For Music On
Hold, choose 64-MOH-IP Ext
Hold Tone.
ANNC Pattern (ANP) A .wav or .mdt-type file. Enter a
three digit number from 000 -
255. This number correlates to an
existing .wav file loaded in the
VS32, that you wish to be played
for the defined ANNC Equipment
#.
Connection Duration Indicates how long a caller will
remain connected (0 - Disconnect
after 30 seconds; 1 - Remain
connected until the caller
disconnects).
Count The number of the route that will
be created for this device
DC The number of digits to be
translated for incoming calls.
Typically, this would be set for the
number of digits in the station
numbers.
Default Gateway Address The IP address of your network's
gateway router.
Do Not Send RingBack Tone Selecting this option box prevents
sending a RBT.
DRS Address The IP address of the Device
Registration Server.
Hardware Type Media Gateway: MC4A/MG-2A/
MC4MG2/SCA-4LCOTA
MG 1.5M: SCA-24PRIA/SN8032/
SN8110
IP Address The Internet Protocol address for
the equipment.